REW 5.20 Beta 4 Unable to sweep higher than 22,050kHz even with 96kHz sample rate?

Chuck Zwicky

New Member
Thread Starter
Joined
Sep 8, 2017
Messages
42
REW 5.20 Beta 4 OSX 10.13.6

Using a UA Apollo interface set to 96kHz and with REW also set to 96kHz, I am wondering why the measurements are limited to a 22.05kHz bandwidth?

Screen Shot 2019-01-12 at 12.20.28 PM.jpg
 

Chuck Zwicky

New Member
Thread Starter
Joined
Sep 8, 2017
Messages
42
I have attached screen captures and a video demonstrating that even if I enter 48,000Hz as the end frequency, it reverts to 22.050 once I start the measurement


Screen Shot 2019-01-12 at 3.30.18 PM.jpg
Screen Shot 2019-01-12 at 3.32.08 PM.jpg
 

Attachments

  • REW @ 96kHz.mov.zip
    426.8 KB · Views: 5

John Mulcahy

REW Author
Joined
Apr 3, 2017
Messages
7,212
Thanks Chuck, I've fixed that for the next beta. In the meantime to work around it open the Measure dialog after you start REW, then close it. Change the sample rate in the soundcard settings then change it back to the rate you want. Should then work correctly until REW is next started.
 
Top Bottom