Part#1 Input-output level imbalance Part#2 oscilloscope and soundcard

astolfo

Member
Thread Starter
Joined
May 1, 2021
Messages
31
My AV System  
Preamp, Processor or Receiver
Cayen
New user here,
Part#1
I have UMIK-1 which connects to my windows machine, for soundcard I use my VEGA G2.1 DAC that has a USB input, the VEGA G2.1 is connected to my amp and onto the speakers.
I can't get the the input and output to match unless I control the output from REW to 24db and the input control set to 1.
Is this something I need to "fix"? If so how do I go about it? The microphone doesn't look like it has the capability to adjust the gain, and in windows I am already at 100%.

Part#2
Is there a how to for setting up a soundcard so it can be used to send the input signal to REWs Oscilloscope?
buy something of the shelf would be ok to, just not an oscilloscope :)


TIA
Astolfo
 

DanDan

Moderator
Staff member
Joined
Mar 10, 2018
Messages
626
The UMIK-1 has internal DIP switches to alter gain. Soundcards can be selected by REW for input.
 

astolfo

Member
Thread Starter
Joined
May 1, 2021
Messages
31
My AV System  
Preamp, Processor or Receiver
Cayen
I was referring to some information on how to use a sound card to measure impedance for example.
 
Top Bottom