My First Foray into REW!

[Dan Twomey]

First some info,
Goal
I have only one goal with REW. That is to as perfectly as I can, integrate my subwoofer with my line arrays for music.
Equipment
Windows Laptop
M-Audio Mobile Pre
EMC8000
DSP1124P
iNuke 3000 amp
DIY 12" Sealed Sub
So Far.....
I 'think' I have everything setup correctly and I am taking accurate measurements. I am still definitely at the tinkering stage since
this is all new to me. I did a first initial run and now I've tried a couple filters to see how they effect my results.
The two filters included below are 1.) 63Hz 30 Bandwidth -15 gain 2.) 40Hz 15 Bandwidth -5 gain.
I took these measurements at my favorite listening level which is about -10db on my HTP (I'm using an Athem D2).

https://photos.app.goo.gl/zQcwwav8ZVo4vKo28

Regards,
Dan

Uploaded my screen capture until I get my mdat file sorted out.

 

[Dan Twomey]

OOOOOPs some sort of flaw in my uploaded mdat file. Will be corrected soon.

 

[Dan Twomey]

Round two at making a decent post of my results. Here's a screen capture of my DSP1124 in bypass mode and then with my first two filters mentioned above.

 

[Dan Twomey]

Haven't got much of a clue but I'm having fun!

 

[John Mulcahy]

There is a lot of oscillation in the soundcard cal file at the top end, better not using that. The response is flat enough not to need it in any case. Could probably do with increasing the mic preamp gain a bit.

 

[AudioCAT]

Haven't got much of a clue but I'm having fun!

Hello friend!
I have a DSP1124P, how can I connect the DSP1124P to a computer?
Is it connected to the MIDI socket of Interfaces?
My Interfaces is Behringer UMC204HD

 

[Dan Twomey]

Hello friend!
I have a DSP1124P, how can I connect the DSP1124P to a computer?
Is it connected to the MIDI socket of Interfaces?
My Interfaces is Behringer UMC204HD

Sorry Friend,
I’ve switched to the MiniDSP product line.

Regards,
Dan

 

[Bernard]

Hello friend!
I have a DSP1124P, how can I connect the DSP1124P to a computer?
Is it connected to the MIDI socket of Interfaces?
My Interfaces is Behringer UMC204HD

Hello friend !
Like that : https://www.roomeqwizard.com/help/help_en-GB/html/bfdcomms.html#top
M-Audio USB Uno or Roland UM-One MkII

 

[AudioCAT]

Hello friend !
Like that : https://www.roomeqwizard.com/help/help_en-GB/html/bfdcomms.html#top
M-Audio USB Uno or Roland UM-One MkII

Thanks Bernard
I'm also trying to find M-Audio USB Uno or Roland UM-One MkII, but I can't find it here. Can only find the following, I hope it can be used.

 

[Bernard]

Thanks Bernard
I'm also trying to find M-Audio USB Uno or Roland UM-One MkII, but I can't find it here. Can only find the following, I hope it can be used.
View attachment 31531 View attachment 31532

That should do it.