Mains are measuring -40db from subs

[wpbpete]

Hi guys,
I just time aligned all my subs at 90db, then ran MCACC pro leaving distance alone. Subs are still at 90db but L&R mains are at 50db all things being equal. I'm I missing a setting somewhere?

 

[John Mulcahy]

Not sure whether you mean an MCACC setting or a setting in REW. If you have REW measurements best posting the mdat file for review.

 

[Matthew J Poes]

We can provide a lot more help into what is going on once we see measurements. However, with your reference to MCACC, it would be helpful if you could share an image of the numbers you are seeing. When you say 90db and 50db, I need to see where those numbers are coming from. Then we can better help address what you have going on.

 

[wpbpete]

Thanks for replying guys
I sorted it out this morning, silly user error

 

[Matthew J Poes]

Thanks for replying guys
I sorted it out this morning, silly user error

Glad to hear its worked out.

If you don't mind me asking, what turned out to be the issue?

 

[wpbpete]

Glad to hear its worked out.

If you don't mind me asking, what turned out to be the issue?

Matt,
Sorry for the delay in responding, busy weekend. As I mentioned it was just a silly error on my part, it was my crossover settings ie:80 vs 200. I measured mains and subs individually at 200 then re-measured subs at 80 and forgot to do the mains at 80, so when I was integrating the two, I was looking at subs crossed at 80 and mains at 200
lol
I still have some work to do but it's looking pretty good now