Help searched at Measuring Time Delay on the Macbook

[Foly83]

(I'd like to retire first, I need to write through the Google translator.)
Hello
I have a problem with the measurement. I'm going to describe how to describe Delay at Measuring Time
I go to the website explained at MiniDSP.
How to set REW (MACBOOK) if you want to measure the subwoofer delay. The Mac does not have a sub-sample time setting. At least I can not figure out where and how to set it. The measurement is therefore not accurate.
And since my subwoofers are very close to the listening position, I get these values
Sub L -23,994 Sub R -24,663 Front L 0.000 Front R 0.063.
After the explanation of this calculation that fits with my Delays delay unfortunately not at all. Can jenand help .. Is there a link for that? Or could someone make a calculation based on my data and explain. Front L, Front R, Sub L, Sub R (As in my example)
I would be very happy about the answer.

 

[John Mulcahy]

There is a very good guide for Mac setup here. All measurements are made with sub-sample resolution now, the option was removed.

 

[Foly83]

Thank you for the link, unfortunately, is special for my problem no explanation here. I'm really just about how I have to measure the subwoofer and get the delay

 

[John Mulcahy]

Please attach the mdat file with your measurements.