JCAV
New Member
Thread Starter
- Joined
- Jun 11, 2022
- Messages
- 7
More
- Preamp, Processor or Receiver
- Pioneer Elite SC-LX904
- Main Amp
- Parasound 5250
- Computer Audio
- Lenovo T450
- DAC
- Matrix Audio X-Sabre Pro
- Universal / Blu-ray / CD Player
- Pioneer Elite BDP-85FD
- Front Speakers
- B&W DM 604 S2
- Center Channel Speaker
- B&W LCR6 S2
- Surround Speakers
- B&W DM 601 S2
- Subwoofers
- B&W ASW-2000
- Video Display Device
- Pioneer Elite Kuro PRO-101HD
- Remote Control
- Logitech Harmony Ultimate Home
- Streaming Equipment
- AppleTV 4K
- Streaming Subscriptions
- Amazon Prime Video
- Other Equipment
- Pioneer Elite CLD-95 Laserdisc Player, Pioneer Elite PD-F17 CD Player, Debut Carbon DC Turntable, Sangean HDT-X1 HD Radio Tuner
This AVR is definitely "vintage" at this point, but still a great machine for older analog and early digital sources.
I kept it for many years in order to still be able to decode Dolby Digital audio soundtracks on my old laserdiscs because it has an RF-AC3 demodulator built-in.
In order to make room in my AV rack, something had to go. So, I found a small outboard RF/AC3 demodulator for my system so I could go ahead and pull this receiver out and consolidate all my sources onto my new generation AV Receiver.
Would like to find a good home for this unit, which has been well loved and still works great, and has the famous Elite rosewood side panels. For anyone out there that may still be into your vintage LD collection like me, this is one of the best integrated AC3 options that Pioneer made.
Otherwise, would be a great unit for an alternate room like a basement, garage, den, office, etc. for FM/AM, CD, MD, LP, tape deck, or vintage DVD and S-VHS sources.
Comes with the original box, user manual, and fancy universal programmable remote control.
$200 plus shipping.
Specifications
A/V receiver - DTS,THX - 120w X 5 channels - Crystal 24-bit A/D Converters, Motorola 24-bit Digital Signal Processor (DSP56362), Burr Brown 96k / 24-bit D/A Converters - 4 Digital Inputs and 1 Digital Output - 4 Digital Inputs and 1 Digital Output - 5 Audio Inputs - 5 Audio/Video Inputs - AC3 RF Digital Input (Laserdisc Dolby Digital demodulation)
Tuning range: FM, MW
Power output: 120 watts per channel into 6Ω (stereo)
Surround output: 120W (front), 120W (center), 120W (rear)
Frequency response: 5Hz to 100kHz
Total harmonic distortion: 0.09%
Input sensitivity: 4.7mV (MM), 335mV (line)
Signal to noise ratio: 80dB (MM), 101dB (line)
Output: 335mV (line)
Video Connections: composite
Dimensions: 457 x 174 x 470mm
Weight: 16.7kg
Accessories: remote control
I kept it for many years in order to still be able to decode Dolby Digital audio soundtracks on my old laserdiscs because it has an RF-AC3 demodulator built-in.
In order to make room in my AV rack, something had to go. So, I found a small outboard RF/AC3 demodulator for my system so I could go ahead and pull this receiver out and consolidate all my sources onto my new generation AV Receiver.
Would like to find a good home for this unit, which has been well loved and still works great, and has the famous Elite rosewood side panels. For anyone out there that may still be into your vintage LD collection like me, this is one of the best integrated AC3 options that Pioneer made.
Otherwise, would be a great unit for an alternate room like a basement, garage, den, office, etc. for FM/AM, CD, MD, LP, tape deck, or vintage DVD and S-VHS sources.
Comes with the original box, user manual, and fancy universal programmable remote control.
$200 plus shipping.
Specifications
A/V receiver - DTS,THX - 120w X 5 channels - Crystal 24-bit A/D Converters, Motorola 24-bit Digital Signal Processor (DSP56362), Burr Brown 96k / 24-bit D/A Converters - 4 Digital Inputs and 1 Digital Output - 4 Digital Inputs and 1 Digital Output - 5 Audio Inputs - 5 Audio/Video Inputs - AC3 RF Digital Input (Laserdisc Dolby Digital demodulation)
Tuning range: FM, MW
Power output: 120 watts per channel into 6Ω (stereo)
Surround output: 120W (front), 120W (center), 120W (rear)
Frequency response: 5Hz to 100kHz
Total harmonic distortion: 0.09%
Input sensitivity: 4.7mV (MM), 335mV (line)
Signal to noise ratio: 80dB (MM), 101dB (line)
Output: 335mV (line)
Video Connections: composite
Dimensions: 457 x 174 x 470mm
Weight: 16.7kg
Accessories: remote control
