custom center speaker cab unfinished & drivers & 3way xover (local pickup only taylors , sc)

dreadknot

Member
Supporter
Thread Starter
Joined
Jan 31, 2020
Messages
53
More  
Preamp, Processor or Receiver
outlaw audio 976 7.2 balanced receviver
Main Amp
Crown xli 800 xls 1502
Additional Amp
Crown xli 800 , Crown xli 800
Other Amp
crown xls 1502
Universal / Blu-ray / CD Player
nvidia shield (2017 model)
Front Speakers
PL-89
Center Channel Speaker
PL-28II (for sale)
Surround Speakers
Klipsch RB-81 (sold)
Surround Back Speakers
Klipsch RB-81
Front Height Speakers
none
Rear Height Speakers
none
Subwoofers
none at the moment
Other Speakers or Equipment
none
Video Display Device
none
Screen
Vizio M55-E0 (2017 model) upgrading to tcl 55in
Remote Control
none
Streaming Equipment
none
Streaming Subscriptions
none
Satellite System
none
Other Equipment
none
(250$ for just the drivers) (an extra 150$ for the cabinet)(an extra 100$ for the xover)

if you want to buy send me you email so i can give my phone number an directions to my home

the items for sale are

my unfinished diy dual 10in center speaker for ht room all the parts needed are part of sale minus paint

for 400$ for the lot (250$ for just the drivers)(150$ for just the cab)(100$ for just the xover)

iv been unable to finish as funds are tight an while all the parts an pieces are ready
for final build to make other builds a bills i decided to sell all for half the original sale price -shipping an tax

1 x Three-Way EDC Crossover for Center Channel Speaker

made by Bill Daniels at dstechlabs.com to these specs (iv had some made for bookshelfs ther very good)

3rd order butterworth 3way at 1200/4000hz

with this config

600watts input at 8 ohms with

400watts at 4 ohms to the lows (should be wired in parallel for crossover connection)

100watts at 4 ohms to the mids (should be wired in parallel for crossover connection)

100watts at 8 ohms to the highs

2 flush cut router guilds for baffle cut an speaker mounting

drivers are

1 x Visaton HTH 8.7 Professional Constant Directivity Horn 8 Ohm

https://www.parts-express.com/Visaton-HTH-8.7-Professional-Constant-Directivity-Horn-8-Ohm-292-649?quantity=1&custcol_ava_item=292-649&custcol_ava_incomeaccount=General&custcol_ava_pickup=F&custcol_disableshopping=F

2 x PRV Audio WG275Ph 1" Horn Loaded Midrange 8 Ohm



0LLC%2FPE_Theme%2F1.0.0%2Fimg%2Fno_image_available.jpg


Home
PRV Audio WG275Ph 1" Horn Loaded Midrange 8 OhmThe compact and convenient WG275Ph from PRV Audio combines a wide dispersion bi-radial horn with a powerful midrange compression driver. This combo has been specifically designed to reproduce the all-important vocal range with authority. With 60° H...

www.parts-express.com
www.parts-express.com




2 x FAITAL PRO 10PR320 - 10" SPEAKER 8ohm



Faital Pro 10PR320 10" Speakers - Faital Pro 10PR320 10" bass guitar speaker and that has a lightweight neodymium magnet - Faital Pro 10PR320 600 watt 10" with efficiency of 96dB SPL. For all high power bass applications. Faital Pro 10PR320 bass guitar speakers.
Faital Pro 10PR320 lightweight neodymium 10 inch woofer for speaker replacement or upgrade. Faital Pro 10PR320 10 inch speaker for all high efficiency speaker systems. The Faital Pro 10PR320 delivers warm defined bass with 600 watts program power handling. Faital Pro 10PR320 speakers here.

usspeaker.com




twin slot ported 52hz cab exturnal dims 48.5in l by 13.5in w by 12.75in d

net inturnal vol 2.3cft

1 - 1.5in think walls with 1.5in front made of unfinished mdf (requires primer base coat )

back yet to be glued on (cab pro built by bill at dstech)



00y0y_8nyxckis2uzz_0ci0nt_1200x900-jpg.jpg

00g0g_91vzkqmkn49z_0k40t2_1200x900-jpg.jpg


00e0e_gxkrcknqgm3z_0iw0t2_1200x900-jpg.jpg


00n0n_ctxvnytkfafz_0ll0t2_1200x900-jpg.jpg


00t0t_gbohflutq0lz_0ll0t2_1200x900-jpg.jpg
 
Top Bottom