Can Audiolense XO be used in this setup?

[Martin-Andersen]

Hi,

I would like to ask if Audiolense xo can be used like this:

I have a music Windows 11 PC with Roon and Dirac on it.

Roon is playing to a virtual soundcard that Dirac has created, and Dirac plays to my DAC on a USB port.

I would like Dirac to send the sound to Audiolense, and Audiolense to send the sound to a multi-channel DAC.

Can this be done?

Also, I am looking for a guide on how to use Audiolense XO.

 

[sledwards]

I will try to help with your confusion. Both programs perform digital room correction, but operate differently. "Sound" does not get sent to Audiolense. Audiolense is used to generate correction filters which can be loaded into Roon or other programs which can perform convolution. There is no need to use both programs. A good intro into DRC and and Audiolense can be found here:

Audiolense Digital Loudspeaker and Room Correction Software Walkthrough

In this article, I walk through the steps of using Audiolense 5.0 (AL5) to biamp my loudspeakers using a linear phase digital crossover. Followed by frequency and time domain correction, so the frequency response is tonally neutral and the direct sound is arriving at my ears all at the same time....

audiophilestyle.com

 

[Martin-Andersen]

I will try to help with your confusion. Both programs perform digital room correction, but operate differently. "Sound" does not get sent to Audiolense. Audiolense is used to generate correction filters which can be loaded into Roon or other programs which can perform convolution. There is no need to use both programs. A good intro into DRC and and Audiolense can be found here:

Audiolense Digital Loudspeaker and Room Correction Software Walkthrough

In this article, I walk through the steps of using Audiolense 5.0 (AL5) to biamp my loudspeakers using a linear phase digital crossover. Followed by frequency and time domain correction, so the frequency response is tonally neutral and the direct sound is arriving at my ears all at the same time....

audiophilestyle.com

Sorry, don't get it. If I use Audiolense XO only for the speaker crossover where does the filters go?

Think I got it. I skip Dirac and create one convolute file that I load into roon

Promise I will read the article

 

[sledwards]

No problem. One filter file per channel. Are you considering a pair of 3-ways speaker with two subs? Exactly what I have done and can help you get started.

Steve