REW Linux installer (requires Java 8)

REW Linux installer (requires Java 8) V5.20 beta 38

You Must Login or Register to Download
Changes in V5.20 beta 18:
  • Don't show zero volume warnings if Suppress Soundcard Errors is selected
  • Bug fix: Scope math traces could be clipped
  • Bug fix: Stop windows selected from the menu being pushed behind the main window
  • Bug fix: Changing graph while loading measurements could cause the legend to show the wrong trace names
  • Bug fix: Devices with no input channels could appear in the mic cal files list
  • Bug fix: Cal files were not being restored on next startup if "Separate cal files for each input" was used
  • Bug fix: USB mic cal file sensitivity data was not processed until the next startup or input change when the cal file was loaded using the Browse button
Changes in V5.20 beta 17:
  • Added Alt+C as a shortcut for the graph capture button
  • Added a warning that Default input cannot be used for SPL calibration
  • Added a message on the Cal Files preferences to select an input device and input if they have not been selected
  • Bug fix: Manual SPL calibration was not working properly in beta 16
  • Bug fix: RTA distortion panel did not show results if the signal generator had not been displayed
V5.20 beta 16 changes:

  • Calibration files for soundcards are now linked to the output device name and the sample rate, the required file will be loaded automatically if the device or sample rate change provided it has been specified
  • Calibration files for input devices (microphones, SPL meters, ...) are now linked to the input device name and the input channel, the required file will be loaded automatically if the device or channel change provided it has been specified
  • All calibration files can be viewed on the Cal Files preferences tab (replaces the Mic/Meter settings tab)
  • The files that will be used for the current measurement can be viewed/changed using the Cal Files... button on the Measure dialog
  • The soundcard calibration file is not used when playback is from file
  • Added number of samples to the cumulative IR shift figure in the Impulse graph controls and the IR delay estimate dialog
  • When highlighting a trace (by placing the mouse cursor over its name in the legend) fade other traces to help it stand out
  • Redisplay level meters if they were showing before an ASIO I/O change
  • Added ASIO secondary output selector on the Soundcard preferences
  • Bug fix: Signal generator level adjustment wasn't working if the "Full scale sine rms is 0 dBFS" option wasn't selected
  • Bug fix: When using ASIO4All the default Windows recording device would be shown as not available
  • Bug fix: Menu bar was duplicated on macOS which could lead to odd behaviour
  • Bug fix: Adjust RTA levels should not affect the values in the RMS input levels panel
  • Bug fix: Output level unit selection was not updating when changed from another output level control
V5.20 beta 15 changes:
  • Bug fix: Measuring with multiple sweeps was broken in beta 14
  • Bug fix: "Drop small filters" could drop manual filters when using the manual optimisation controls
Changes in V5.20 beta 14:
  • Added Analysis options to automatically correct any difference between the input and output clock rates when using an acoustic timing reference or when using a loopback as a reference
  • Soundcard calibration measurements check for and correct input/output clock rate mismatch
  • Added manual clock adjustment in the Impulse graph controls
  • Added a headroom figure on the filters panel showing the impact of any overall gain in the filter set
  • Use longer sweeps for soundcard calibration at higher sample rates
  • Added a display of the cumulative IR shift in the Impulse graph controls
  • If changing from one graph with frequency as X axis to another keep the cursor at the same frequency (if within the graph span)
  • Bug fix: Trace offset was not taken into account when shifting SPL axis to bring trace into view
  • Bug fix: Sweep lengths that were too short for the selected sample rate could be chosen (e.g. 128k sweep at 192 kHz sample rate), that is now prevented
V5.20 beta 13 changes:
  • Updated sweep file version number and added check that files loaded are the current version before using them
  • Changed input and output scaling controls to use "FS sine" instead of "0 dBFS" so the figure is independent of the "Full scale sine rms is 0 dBFS" setting
  • Generator voltage level display now uses V, mV, uV or nV according to the value. Values change in steps of 0.1 dB when using the arrow buttons.
  • Added an option to capture the graph image in monochrome, using 4 different line styles instead of different colours
  • Added an option on Linux to force stereo access to audio interfaces with Java drivers as some interfaces may report they support multichannel at the requested sample rate but may not operate properly
  • Start the SPL meter automatically when it is opened
  • Pressing Cancel while a measurement is in progress stops the measurement but now doesn't close the measurement dialog
  • Bug fix: Stepped sine dialog did not allow 0 dBFS level when the "Full scale sine rms is 0 dBFS" option was selected
Changes in V5.20 beta 12:
  • Replaced the RTA "DR" figure by A-weighted noise plus distortion in the current Y axis units
  • Added a basic scope data export capability
  • Bug fix: Predicted response was not updated correctly when loading a measurement with filters
  • Bug fix: Measurement sweep could be shorter than intended for some combinations of start frequency, end frequency and total length
  • Bug fix: RTA file processing would not give a result for files the same length as the FFT length
  • Bug fix: When processing files the RTA sample rate remained at the rate of the first file processed
  • Bug fix: The All SPL button to "Average the Responses" was disabled when an averaged measurement was selected
  • Bug fix: An exception could occur while calculating the impulse response
Changes in V5.20 beta 11:
  • Added 192 kHz to the list of Java sample rates for all platforms and made changes to improve behaviour at 192k
  • Restore the previous generator signal selection after checking levels, doing a soundcard calibration or making a stepped sine measurement
  • Increased the measurement name field width on wider screens
  • Include the zoom box on graph captures
  • Changed the Predicted response on the Filter Adjust graph to use the windowed rather than the full IR
  • Changed the Predicted response on the Filter Adjust graph to reflect the equaliser selection's fixed sample rate rather than adapting to the measurement rate
  • Added a view preference to control whether phase wraps are shown with dashed lines or not at all
  • Revised the dialog for exporting distortion data as text for stepped sine data
  • Added triple tone signals to the generator
  • Added TDFD presets to the dual tone signals
  • Allow dual and triple tone frequencies up to half the sample rate
  • Added options to specify the period of tone bursts in cycles, milliseconds or samples (binary powers to match FFT lengths)
  • Reduced minimum bandwidth for custom filtered random noise to 1/3 octave or 10 Hz, whichever is greater
  • Reduced minimum bandwidth for custom filtered periodic noise to 10% or 10 Hz, whichever is greater
  • Show a message if REW has changed the RTA window to Rectangular for multitone TD+N calculation
  • Expanded the dither bit depth choice to cover all values from 16 to 25 bits
  • Added ASIO sample format display in the status bar. Note that the data bit depth is often lower than the sample format allows, REW shows the detected bit depth for input data based on the data values received
  • Added two more date format options for measurement naming
  • Added the input device to the input name shown in the title of the RTA, SPL meter, Scope and SPL Logger windows
  • Show the output device and output in the title of the signal generator window
  • Added in-band (22.4 Hz to 22.4 kHz) and out of band (> 22.4 kHz) levels to the RTA levels panel
  • Add the RTA levels panel to RTA image captures
  • Show the peak input SPL before clipping in the main window status bar
  • Added an equaliser entry for the miniDSP C-DSP 8x12 DL, 10 filters at 48 kHz
  • Bug fix: When using Java drivers switching to an output device with fewer channels than the current output device would cause an exception
  • Bug fix: Filtered IR could get stuck in a loop when changing time reversed or zero phase setting
  • Bug fix: File playback did not accept sweep files that had the timing reference in one channel and the measurement sweep in the other
  • Bug fix: Measurement sweep end frequency was limited to 96 kHz even if the sample rate was above 192 kHz
  • Bug fix: Sig gen output level spinner was being updated twice if the "Full scale sine rms is 0 dBFS" setting changed
  • Bug fix: Sig gen output level peak value was incorrect if the unit was not dBFS and "Full scale sine rms is 0 dBFS" was selected
Changes in V5.20 beta 10, detailed here.
  • Changed stepped sine silence interval to be in seconds, allowing up to 60 seconds before the next tone starts
  • When the timing mode is loopback echo the signal generator output on the timing reference output for all signal types
  • Added a control for trace thickness on the graph image capture dialog
  • Fixed the menu on macOS so it stays visible for all REW windows
  • Use the native file dialog on macOS to choose the folder for exporting all measurements as text
  • Show a warning if the input channels appear to have been swapped for impedance measurements being used for TS parameter calculations
  • Allow up to 200 kHz span for frequency axis
  • Added support for importing impulse responses that were exported as text
  • Set macOS default for always on top window states to false to avoid a Java bug that causes the windows to disappear on restore if the Dock preference "Minimise windows into application icon" is selected
  • Removed fade in from linear part of measurement sweep to increase LF level and suppress LF noise
  • Added a 22-bit dither setting
  • Bug fix: VU meter RMS area wasn't wide enough for levels below -99.9 dB on macOS
  • Bug fix: On macOS windows were not being restored to their last used sizes
V5.20 beta 9 changes, detailed here:
  • Reduced warning threshold for timing reference to -45 dBFS (from -30dBFS) and only show the warning once in a session
  • Added a window selection for the stepped sine dialog, Rectangular recommended when the generator and input are on the same device
  • Added an option to show or hide the filter numbers along the top of the EQ window's filter adjust graph
  • Added a warning in the help about using long sweeps if input and output are not on the same device due to potential problems from sample clock differences
  • Added a soundcard input impedance setting on the Measure dialog for impedance measurements
  • Added view preferences for keeping the SPL meter, VU meters and signal generator on top of other windows
  • Bug fix: Output level control didn't increment or decrement properly on the volts scale for small voltages
  • Bug fix: If a measurement was opened while on the waterfall or spectrogram graph the waterfall or spectrogram would be generated but not displayed
  • Bug fix: Timing signal detection could fail despite good signal level
  • Bug fix: Waterfall and spectrogram generation could be incomplete on some devices
  • Bug fix: Stepped sine did not operate correctly with 0% overlap for FFT lengths above 64k
  • Bug fix: UMM-6 volume compensation was incorrect on macOS
  • Bug fix: SPL limit on Measure dialog couldn't be adjusted
Top Bottom