No longer used:  REW Windows 32-bit installer (requires 32-bit Java 8)

No longer used: REW Windows 32-bit installer (requires 32-bit Java 8) V5.20 beta 7

You Must Login or Register to Download
Changes in V5.19 beta 10:

  • 24-bit data is now supported where the JVM makes it available (currently macOS and probably Linux)
  • Added 176.4, 352.8 and 384 kHz to the sample rates allowed for ASIO
  • Allow generator to continue running if ASIO output selection is changed - audio will be interrupted briefly, however
  • Added a dBc axis option for the RTA (dB relative to carrier, mainly used to present data relative to the level of the fundamental tone in the signal)
  • Only stop the generator after SPL calibration if the generator was started by REW
  • Added a colour scheme for spectrograms and waterfalls based on Dave Green's cubehelix, see https://www.mrao.cam.ac.uk/~dag/CUBEHELIX/
  • The delay figure with acoustic timing reference now uses the Estimate IR Delay process (cross correlation with minimum phase response) for better results with measurements that do not have HF content (mids or woofers)
  • Added warning to check mic access is allowed in Windows Privacy settings if input is not accessible
  • Added an option to allow/disallow narrow filters below 200 Hz when matching to target
  • Added an option to use IEC263 25 dB/decade aspect ratio when capturing graph images
  • Changed graph image capture to render the graph directly at the chosen width rather than scaling from the current width
  • Added a Tone Burst option to the signal generator
  • The Nimbus look and feel places the file chooser focus on the directory selector instead of the file name field, added a workaround for that
  • Added options to normalise, apply window and export min phase version to the export impulse response as text dialog
  • Updated the impedance measurement setup images to make it clearer that outputs and inputs are from the same device
  • Expanded the RT60 graph help
  • Bug fix: Aborting measurement for exceeding SPL limit should not apply to impedance measurements
  • Bug fix: Acoustic timing ref would be one channel out if using Java drivers with a multi-channel output and the ref output wasn't left or right
  • Bug fix: Spectrogram top level could get set to an incorrect value when changing measurements
  • Bug fix: Starting phase for signal generator linear or log sweeps was not reset to zero for each new sweep (did not affect measurement sweeps)
  • Bug fix: The level of custom filtered pink noise was affected by the low and high cut filter frequencies even if the filters were disabled
Top Bottom