Yamaha RX Z9 help

Harrycr

Member
Thread Starter
Joined
Apr 22, 2020
Messages
127
Hi my amp has a hiss/white noise coming from the right speaker when not playing anything.
When turning it up the volume (no music etc) the hiss doesn't increase in volume.
Can't hear it when playing music.
Tech person (hasn't seen it yet) has said it possibly could be the DAC or DSP.
If it is there's no way of fixing it, unfortunately.
Is there any other way I could save my amp?

Thanks
 

Todd Anderson

Editor / Senior Admin
Staff member
Joined
Jan 20, 2017
Messages
9,141
Location
Balt/Wash Metro
More  
Preamp, Processor or Receiver
StormAudio ISP.24 MK2
Main Amp
Emotiva XPA-5
Additional Amp
Emotiva XPA Gen3 2.8 multichannel amp
Other Amp
Denon X8500H
Computer Audio
AudioEngine A2+
DAC
THX ONYX
Universal / Blu-ray / CD Player
Kaleidescape TERRA, OPPO UDP-203, Panasonic UB9000
Front Speakers
GoldenEar Technology Triton One.R
Center Channel Speaker
GoldenEar Technology SuperCenter Reference
Surround Speakers
SVS Ultra Surround
Surround Back Speakers
SVS Ultra Bookshelf
Front Height Speakers
SVS Prime Elevation x4 (Top Front, Top Mid-Front)
Rear Height Speakers
SVS Prime Elevation x4 (Top Middle, Top Rear)
Subwoofers
dual SVS SB16s + dual PSA XS30s
Other Speakers or Equipment
Behringer 1124p; Aura Bass Shaker Pros; SuperSub X
Video Display Device
JVC NX7
Screen
Seymour Screen Excellence, Enlightor NEO AT Screen
Streaming Equipment
iFi Audio Zen Blue
Streaming Subscriptions
Qobuz, TIDAL, Spotify, ROON
Other Equipment
LG Electronics 65-inch B6 OLED, Sony 65-inch X900F, ZeroSurge 8R15W x 2, ZeroSurge 2R15W x 2
How loud is the sound?

Is it always there, no matter which source you’re using?
 

perceval

Member
Joined
Oct 4, 2017
Messages
34
Todd's suggestion is good, try to change the source.

Also, are there LEDs or some light fixtures near the right speaker?
It could be interference from a nearby electrical fixture. Especially since it doesn't go up if you turn the volume up. My guess is it's picking up interference, and your amp is fine.

Why would DSP have anything to do with that? I suggest you find another tech.
 

Todd Anderson

Editor / Senior Admin
Staff member
Joined
Jan 20, 2017
Messages
9,141
Location
Balt/Wash Metro
More  
Preamp, Processor or Receiver
StormAudio ISP.24 MK2
Main Amp
Emotiva XPA-5
Additional Amp
Emotiva XPA Gen3 2.8 multichannel amp
Other Amp
Denon X8500H
Computer Audio
AudioEngine A2+
DAC
THX ONYX
Universal / Blu-ray / CD Player
Kaleidescape TERRA, OPPO UDP-203, Panasonic UB9000
Front Speakers
GoldenEar Technology Triton One.R
Center Channel Speaker
GoldenEar Technology SuperCenter Reference
Surround Speakers
SVS Ultra Surround
Surround Back Speakers
SVS Ultra Bookshelf
Front Height Speakers
SVS Prime Elevation x4 (Top Front, Top Mid-Front)
Rear Height Speakers
SVS Prime Elevation x4 (Top Middle, Top Rear)
Subwoofers
dual SVS SB16s + dual PSA XS30s
Other Speakers or Equipment
Behringer 1124p; Aura Bass Shaker Pros; SuperSub X
Video Display Device
JVC NX7
Screen
Seymour Screen Excellence, Enlightor NEO AT Screen
Streaming Equipment
iFi Audio Zen Blue
Streaming Subscriptions
Qobuz, TIDAL, Spotify, ROON
Other Equipment
LG Electronics 65-inch B6 OLED, Sony 65-inch X900F, ZeroSurge 8R15W x 2, ZeroSurge 2R15W x 2
There could be a chip failure... perhaps a ground failure, internally. But, I would start with the basics, first. Check cables and sources. Make sure there's not exernal interference.

Lots to do before you throw out the baby with the bath water!
 

Harrycr

Member
Thread Starter
Joined
Apr 22, 2020
Messages
127
How loud is the sound?

Is it always there, no matter which source you’re using?
Thanks for your reply.
Can hear it from about a meter away.
Doesn't appear to be heard when music is playing. My partner she says its like a white noise.
There is one source and that's the DVD player connected via Optical.
 

Harrycr

Member
Thread Starter
Joined
Apr 22, 2020
Messages
127
Todd's suggestion is good, try to change the source.

Also, are there LEDs or some light fixtures near the right speaker?
It could be interference from a nearby electrical fixture. Especially since it doesn't go up if you turn the volume up. My guess is it's picking up interference, and your amp is fine.

Why would DSP have anything to do with that? I suggest you find another tech.
Thanks for your reply.
Nothing different from before.
It seemed to be noticeable when I changed to a different pair of speakers.
The other speakers did it on both sides but quieter.
Swapped speakers right to left etc. and sound stayed on the right.

Not sure re DSP but he did say to try both of these DSP & DAC tests he suggested, haven't done yet.
 

Harrycr

Member
Thread Starter
Joined
Apr 22, 2020
Messages
127
There could be a chip failure... perhaps a ground failure, internally. But, I would start with the basics, first. Check cables and sources. Make sure there's not exernal interference.

Lots to do before you throw out the baby with the bath water!
Thanks again.
The tech did say it could be a chip as well.

Would speakers possibly have more tendency for interference than others?

The left side is super quiet, quieter than the originals.

I have Antimode Dual Core 2.0 between the pre and in on the Z9.
Tried swapping cables on this unit but continued.
 

perceval

Member
Joined
Oct 4, 2017
Messages
34
Would speakers possibly have more tendency for interference than others?

The left side is super quiet, quieter than the originals.
If the new speaker have higher sensitivity, then yes, they would be more prone to interference.
The idea of the chip being faulty doesn't appeal to me, because if it was indeed the DAC, then the amplification stage would pick it up and amplify it, since it is downstream from the DAC.
Have your partner sit next to the speaker, go around the room / house and turn on/off appliances, light fixtures, fans, etc... try to pin-point the source of the interference.
 

Wayne A. Pflughaupt

Moderator
Staff member
Joined
May 21, 2017
Messages
633
Location
Corpus Christi, TX
More  
Preamp, Processor or Receiver
Yamaha CX-A5000 A/V Preamp / Processor
Main Amp
Yamaha RX-Z9 AV Receiver (as multichannel amp)
Universal / Blu-ray / CD Player
Denon DCT-3313 UDCI Universal Disc Player
Front Speakers
Canton Karat 920
Center Channel Speaker
Canton Karat 920
Front Wide Speakers
Realistic Minimus 7 (front EFX speakers)
Surround Speakers
Canton Plus D
Surround Back Speakers
Yamaha YDP2006 Digital Parametric EQ (front mains)
Front Height Speakers
Yamaha YDP2006 Digital Parametric EQ (surrounds)
Rear Height Speakers
Yamaha YDP2006 Digital Parametric EQ (sub)
Subwoofers
Hsu ULS-15 MKII
Other Speakers or Equipment
Adcom ACE-515 (for power management)
Video Display Device
Yamaha DT-2 (digital clock display)
Screen
Pioneer PDP-6010FD 60" Plasma TV
Remote Control
Stock Yamaha Remote
Streaming Equipment
Roku Express
Other Equipment
Audio Control R130 Real Time Analyzer
I’d suggest taking the Antimode out of the signal loop and see if that makes a difference. If it does, then the Antimode is the problem. The Z9 is black-hole silent. That you were hearing some noise before on both channels tells me it might well be the actual source. I expect your new speakers are more efficient than your previous ones.

Otherwise, I recall having an issue with my Z9 when I first got it. Don’t recall what exactly it was, but I do remember the fix was tightening the screws on the back panel between the speaker binding posts. All of mine were a bit loose and took at least a 1/4 inch turn to fully tighten. Might see if that makes a difference.

Regards,
Wayne
 

Harrycr

Member
Thread Starter
Joined
Apr 22, 2020
Messages
127
If the new speaker have higher sensitivity, then yes, they would be more prone to interference.
The idea of the chip being faulty doesn't appeal to me, because if it was indeed the DAC, then the amplification stage would pick it up and amplify it, since it is downstream from the DAC.
Have your partner sit next to the speaker, go around the room / house and turn on/off appliances, light fixtures, fans, etc... try to pin-point the source of the interference.
Thanks
Yes strange how the other speaker (left) is really quiet, even close up ear against the speaker itself.

So if it was the DAC the volume of the hiss/white noise would go up?

Should I start buy turning off closer to the right speaker. The amp is closest to the hissing speaker (right), not by that much though.


The original speakers – Energy Veritas 2.3i floorstanders
Current speakers Paradigm S2 Signature V1 standmounts.
 

Harrycr

Member
Thread Starter
Joined
Apr 22, 2020
Messages
127
I’d suggest taking the Antimode out of the signal loop and see if that makes a difference. If it does, then the Antimode is the problem. The Z9 is black-hole silent. That you were hearing some noise before on both channels tells me it might well be the actual source. I expect your new speakers are more efficient than your previous ones.

Otherwise, I recall having an issue with my Z9 when I first got it. Don’t recall what exactly it was, but I do remember the fix was tightening the screws on the back panel between the speaker binding posts. All of mine were a bit loose and took at least a 1/4 inch turn to fully tighten. Might see if that makes a difference.

Regards,
Wayne
Thanks

Does the Z9 have jumper leads between the pre in & out?
This is for when I take out the Antimode so I don’t have to bridge it.
Its not a nice job unfortunately getting to the back of the gear, especially the amp.

When I turn up the Antimode volume the hiss/white noise increase a bit, not a lot but noticeable.

That’s right re screws, that was it cutting out suddenly.

Did you end up using Z9 as a power amp only?
 

Wayne A. Pflughaupt

Moderator
Staff member
Joined
May 21, 2017
Messages
633
Location
Corpus Christi, TX
More  
Preamp, Processor or Receiver
Yamaha CX-A5000 A/V Preamp / Processor
Main Amp
Yamaha RX-Z9 AV Receiver (as multichannel amp)
Universal / Blu-ray / CD Player
Denon DCT-3313 UDCI Universal Disc Player
Front Speakers
Canton Karat 920
Center Channel Speaker
Canton Karat 920
Front Wide Speakers
Realistic Minimus 7 (front EFX speakers)
Surround Speakers
Canton Plus D
Surround Back Speakers
Yamaha YDP2006 Digital Parametric EQ (front mains)
Front Height Speakers
Yamaha YDP2006 Digital Parametric EQ (surrounds)
Rear Height Speakers
Yamaha YDP2006 Digital Parametric EQ (sub)
Subwoofers
Hsu ULS-15 MKII
Other Speakers or Equipment
Adcom ACE-515 (for power management)
Video Display Device
Yamaha DT-2 (digital clock display)
Screen
Pioneer PDP-6010FD 60" Plasma TV
Remote Control
Stock Yamaha Remote
Streaming Equipment
Roku Express
Other Equipment
Audio Control R130 Real Time Analyzer
The Z9 does no have jumpers like the earlier models did.

Regards,
Wayne
 

Wayne A. Pflughaupt

Moderator
Staff member
Joined
May 21, 2017
Messages
633
Location
Corpus Christi, TX
More  
Preamp, Processor or Receiver
Yamaha CX-A5000 A/V Preamp / Processor
Main Amp
Yamaha RX-Z9 AV Receiver (as multichannel amp)
Universal / Blu-ray / CD Player
Denon DCT-3313 UDCI Universal Disc Player
Front Speakers
Canton Karat 920
Center Channel Speaker
Canton Karat 920
Front Wide Speakers
Realistic Minimus 7 (front EFX speakers)
Surround Speakers
Canton Plus D
Surround Back Speakers
Yamaha YDP2006 Digital Parametric EQ (front mains)
Front Height Speakers
Yamaha YDP2006 Digital Parametric EQ (surrounds)
Rear Height Speakers
Yamaha YDP2006 Digital Parametric EQ (sub)
Subwoofers
Hsu ULS-15 MKII
Other Speakers or Equipment
Adcom ACE-515 (for power management)
Video Display Device
Yamaha DT-2 (digital clock display)
Screen
Pioneer PDP-6010FD 60" Plasma TV
Remote Control
Stock Yamaha Remote
Streaming Equipment
Roku Express
Other Equipment
Audio Control R130 Real Time Analyzer
Yes, using the Z9's multi-channel inputs. They can function as direct-access connections to the internal amplifiers.

Regards,
Wayne A. Pflughaupt
 

Harrycr

Member
Thread Starter
Joined
Apr 22, 2020
Messages
127
Yes, using the Z9's multi-channel inputs. They can function as direct-access connections to the internal amplifiers.

Regards,
Wayne A. Pflughaupt
Thanks
If it turns out to be the DAC or DSP can I still save the amplifiers and do what you have done, although the mains don't have a input?
 

Wayne A. Pflughaupt

Moderator
Staff member
Joined
May 21, 2017
Messages
633
Location
Corpus Christi, TX
More  
Preamp, Processor or Receiver
Yamaha CX-A5000 A/V Preamp / Processor
Main Amp
Yamaha RX-Z9 AV Receiver (as multichannel amp)
Universal / Blu-ray / CD Player
Denon DCT-3313 UDCI Universal Disc Player
Front Speakers
Canton Karat 920
Center Channel Speaker
Canton Karat 920
Front Wide Speakers
Realistic Minimus 7 (front EFX speakers)
Surround Speakers
Canton Plus D
Surround Back Speakers
Yamaha YDP2006 Digital Parametric EQ (front mains)
Front Height Speakers
Yamaha YDP2006 Digital Parametric EQ (surrounds)
Rear Height Speakers
Yamaha YDP2006 Digital Parametric EQ (sub)
Subwoofers
Hsu ULS-15 MKII
Other Speakers or Equipment
Adcom ACE-515 (for power management)
Video Display Device
Yamaha DT-2 (digital clock display)
Screen
Pioneer PDP-6010FD 60" Plasma TV
Remote Control
Stock Yamaha Remote
Streaming Equipment
Roku Express
Other Equipment
Audio Control R130 Real Time Analyzer
Correct. The "Power Amp Inputs" only access the front three channels. But with the Multichannel inputs, you can have a seven-channel amplifier.

Regards,
Wayne
 

Harrycr

Member
Thread Starter
Joined
Apr 22, 2020
Messages
127
Correct. The "Power Amp Inputs" only access the front three channels. But with the Multichannel inputs, you can have a seven-channel amplifier.

Regards,
Wayne
Thanks Wayne.
All of the seven are 170W?

Excuse me, I'm not familiar with this side of things.

With this setup I would be able to hookup a Minidsp Dirac 22A like normal?

Can I still use the 2 x subwoofer out of the Z9?

I have 8 speakers
Mains x 2
Centre
Back surround (side wall) x 2
Back center (back wall)
Front presence x 2

Which receiver did you get in the long, another Yamaha?

Thank you
 
Last edited:

Harrycr

Member
Thread Starter
Joined
Apr 22, 2020
Messages
127
Correct. The "Power Amp Inputs" only access the front three channels. But with the Multichannel inputs, you can have a seven-channel amplifier.

Regards,
Wayne
Hi Wayne which receiver did you get to use with the Z9.
Would a Z11 be ok for this.
 

Wayne A. Pflughaupt

Moderator
Staff member
Joined
May 21, 2017
Messages
633
Location
Corpus Christi, TX
More  
Preamp, Processor or Receiver
Yamaha CX-A5000 A/V Preamp / Processor
Main Amp
Yamaha RX-Z9 AV Receiver (as multichannel amp)
Universal / Blu-ray / CD Player
Denon DCT-3313 UDCI Universal Disc Player
Front Speakers
Canton Karat 920
Center Channel Speaker
Canton Karat 920
Front Wide Speakers
Realistic Minimus 7 (front EFX speakers)
Surround Speakers
Canton Plus D
Surround Back Speakers
Yamaha YDP2006 Digital Parametric EQ (front mains)
Front Height Speakers
Yamaha YDP2006 Digital Parametric EQ (surrounds)
Rear Height Speakers
Yamaha YDP2006 Digital Parametric EQ (sub)
Subwoofers
Hsu ULS-15 MKII
Other Speakers or Equipment
Adcom ACE-515 (for power management)
Video Display Device
Yamaha DT-2 (digital clock display)
Screen
Pioneer PDP-6010FD 60" Plasma TV
Remote Control
Stock Yamaha Remote
Streaming Equipment
Roku Express
Other Equipment
Audio Control R130 Real Time Analyzer
My apologies, I saw your previous post but must have got distracted and forgot to reply.

All of the seven are 170W?
The Z9 is 170 watts on all channels except the front presence. But there are no input jacks for those anyway.

With this setup I would be able to hookup a Minidsp Dirac 22A like normal?
Any processor could be connected between the pre-amp and Z9. However, the Minidsp Dirac 22A only has XLR connections, so it’s not the best fit.

Can I still use the 2 x subwoofer out of the Z9?
No. The Z9 would be functioning only as an amplifier. Subwoofer outputs would come from the pre-amp.

Which receiver did you get in the long, another Yamaha?
Not another receiver, but the CX-A5000, which is only a pre-amp. IOW, it has no built-in amplifiers.

Would a Z11 be ok for this.
I guess, but it seems pointless since the Z11 has its own highly capable and robust amplifiers. The only problem with the Z11 is that it doesn’t have any amp input jacks like the Z9 has, so you can’t use any outboard processors.

If you do use the Z11 and Z9 together, you have too many speakers for the Z9. So you’d have to use the Z11’s front presence amplifiers for those speakers.

BTW, forgot to mention: To access all seven of the Z9’s amplifiers via the Multichannel Input jacks, the front panel has to be set for Multichannel, and then Pure Direct. With these selections, the front display turns off and the Pure Direct button lights green. (If the Pure Direct button lights blue, it is in Stereo mode.)

Regards,
Wayne
 

Harrycr

Member
Thread Starter
Joined
Apr 22, 2020
Messages
127
My apologies, I saw your previous post but must have got distracted and forgot to reply.


The Z9 is 170 watts on all channels except the front presence. But there are no input jacks for those anyway.


Any processor could be connected between the pre-amp and Z9. However, the Minidsp Dirac 22A only has XLR connections, so it’s not the best fit.


No. The Z9 would be functioning only as an amplifier. Subwoofer outputs would come from the pre-amp.


Not another receiver, but the CX-A5000, which is only a pre-amp. IOW, it has no built-in amplifiers.


I guess, but it seems pointless since the Z11 has its own highly capable and robust amplifiers. The only problem with the Z11 is that it doesn’t have any amp input jacks like the Z9 has, so you can’t use any outboard processors.

If you do use the Z11 and Z9 together, you have too many speakers for the Z9. So you’d have to use the Z11’s front presence amplifiers for those speakers.

BTW, forgot to mention: To access all seven of the Z9’s amplifiers via the Multichannel Input jacks, the front panel has to be set for Multichannel, and then Pure Direct. With these selections, the front display turns off and the Pure Direct button lights green. (If the Pure Direct button lights blue, it is in Stereo mode.)

Regards,
Wayne
Thanks Wayne no worries.
I have a opportunity to get Z9 & Z11 they don't come up for sale over here often at all.
For both Usd $970 is this reasonable price do you think?
 

Wayne A. Pflughaupt

Moderator
Staff member
Joined
May 21, 2017
Messages
633
Location
Corpus Christi, TX
More  
Preamp, Processor or Receiver
Yamaha CX-A5000 A/V Preamp / Processor
Main Amp
Yamaha RX-Z9 AV Receiver (as multichannel amp)
Universal / Blu-ray / CD Player
Denon DCT-3313 UDCI Universal Disc Player
Front Speakers
Canton Karat 920
Center Channel Speaker
Canton Karat 920
Front Wide Speakers
Realistic Minimus 7 (front EFX speakers)
Surround Speakers
Canton Plus D
Surround Back Speakers
Yamaha YDP2006 Digital Parametric EQ (front mains)
Front Height Speakers
Yamaha YDP2006 Digital Parametric EQ (surrounds)
Rear Height Speakers
Yamaha YDP2006 Digital Parametric EQ (sub)
Subwoofers
Hsu ULS-15 MKII
Other Speakers or Equipment
Adcom ACE-515 (for power management)
Video Display Device
Yamaha DT-2 (digital clock display)
Screen
Pioneer PDP-6010FD 60" Plasma TV
Remote Control
Stock Yamaha Remote
Streaming Equipment
Roku Express
Other Equipment
Audio Control R130 Real Time Analyzer
$970 for both? I'd say that's a good price, especially if they're in excellent condition.

Regards,
Wayne
 

Wayne A. Pflughaupt

Moderator
Staff member
Joined
May 21, 2017
Messages
633
Location
Corpus Christi, TX
More  
Preamp, Processor or Receiver
Yamaha CX-A5000 A/V Preamp / Processor
Main Amp
Yamaha RX-Z9 AV Receiver (as multichannel amp)
Universal / Blu-ray / CD Player
Denon DCT-3313 UDCI Universal Disc Player
Front Speakers
Canton Karat 920
Center Channel Speaker
Canton Karat 920
Front Wide Speakers
Realistic Minimus 7 (front EFX speakers)
Surround Speakers
Canton Plus D
Surround Back Speakers
Yamaha YDP2006 Digital Parametric EQ (front mains)
Front Height Speakers
Yamaha YDP2006 Digital Parametric EQ (surrounds)
Rear Height Speakers
Yamaha YDP2006 Digital Parametric EQ (sub)
Subwoofers
Hsu ULS-15 MKII
Other Speakers or Equipment
Adcom ACE-515 (for power management)
Video Display Device
Yamaha DT-2 (digital clock display)
Screen
Pioneer PDP-6010FD 60" Plasma TV
Remote Control
Stock Yamaha Remote
Streaming Equipment
Roku Express
Other Equipment
Audio Control R130 Real Time Analyzer
There's a rotary input selection knob on the front panel. Seems blindingly obvious, so I expect I'm missing something?

Regards,
Wayne
 

Harrycr

Member
Thread Starter
Joined
Apr 22, 2020
Messages
127
There's a rotary input selection knob on the front panel. Seems blindingly obvious, so I expect I'm missing something?

Regards,
Wayne
Hi Wayne sorry didn't reply to you.

Matter of interest does the CX A5000 preamp sound better than the Z9 on its own?
 

Wayne A. Pflughaupt

Moderator
Staff member
Joined
May 21, 2017
Messages
633
Location
Corpus Christi, TX
More  
Preamp, Processor or Receiver
Yamaha CX-A5000 A/V Preamp / Processor
Main Amp
Yamaha RX-Z9 AV Receiver (as multichannel amp)
Universal / Blu-ray / CD Player
Denon DCT-3313 UDCI Universal Disc Player
Front Speakers
Canton Karat 920
Center Channel Speaker
Canton Karat 920
Front Wide Speakers
Realistic Minimus 7 (front EFX speakers)
Surround Speakers
Canton Plus D
Surround Back Speakers
Yamaha YDP2006 Digital Parametric EQ (front mains)
Front Height Speakers
Yamaha YDP2006 Digital Parametric EQ (surrounds)
Rear Height Speakers
Yamaha YDP2006 Digital Parametric EQ (sub)
Subwoofers
Hsu ULS-15 MKII
Other Speakers or Equipment
Adcom ACE-515 (for power management)
Video Display Device
Yamaha DT-2 (digital clock display)
Screen
Pioneer PDP-6010FD 60" Plasma TV
Remote Control
Stock Yamaha Remote
Streaming Equipment
Roku Express
Other Equipment
Audio Control R130 Real Time Analyzer
I can't tell a difference between the two. Your mileage may vary. :)

Regards,
Wayne
 
Top Bottom