I figured I would try a different tact with this thread.
I've noticed there are some number of REW users who deploy the Omnimic V2 and I was hoping to get some guidance on how to dial in the one I just purchased.
I was finally able to get REW to recognize my new microphone and I took some initial measurements.
For a quick background, I use the UMIK-1 microphone to setup my listening environment and I'm very happy with the results. I recently modified the UMIK-1 dip switches to give me more headroom (I went from 120db headroom (18db dipswitch setting) to 134db headroom (6db dipswitch setting). I modified the sens and gain parameters in the calibration file accordingly.
With my first Omnimic V2 measurements, I found the resulting graph to look very similar to the UMIK-1 graph, but about 15db higher than the UMIK-1 graph. I also noted that the sweep ran out of headroom. With a -14db AVR volume setting, the UMIK-1 sweeps typically have about 20db-30db headroom. At that same -14dbv volume setting, the Omnimic ran out of headroom at 0db.
I do have the Omnimic calibration file, which is recognized by REW. I noticed it does have a sens parameter, but no gain parameter.
For those of you who deploy the Omnimic V2 with REW, would you be able to give me some pointers?
I've noticed there are some number of REW users who deploy the Omnimic V2 and I was hoping to get some guidance on how to dial in the one I just purchased.
I was finally able to get REW to recognize my new microphone and I took some initial measurements.
For a quick background, I use the UMIK-1 microphone to setup my listening environment and I'm very happy with the results. I recently modified the UMIK-1 dip switches to give me more headroom (I went from 120db headroom (18db dipswitch setting) to 134db headroom (6db dipswitch setting). I modified the sens and gain parameters in the calibration file accordingly.
With my first Omnimic V2 measurements, I found the resulting graph to look very similar to the UMIK-1 graph, but about 15db higher than the UMIK-1 graph. I also noted that the sweep ran out of headroom. With a -14db AVR volume setting, the UMIK-1 sweeps typically have about 20db-30db headroom. At that same -14dbv volume setting, the Omnimic ran out of headroom at 0db.
I do have the Omnimic calibration file, which is recognized by REW. I noticed it does have a sens parameter, but no gain parameter.
For those of you who deploy the Omnimic V2 with REW, would you be able to give me some pointers?
