What do I do with this room

astolfo

Member
Thread Starter
Joined
May 1, 2021
Messages
31
More  
Preamp, Processor or Receiver
Cayen
Looks to me like REL volume is way too high. Also roll off is a little too low. Try to set to 80 with REL 1/2 as loud. Also, can the REL polarity be something in-between 0 and 180? Try 160 and 200 and see if the fills in the cancellation at 60.
The REL has only 0 or 180 for phase.
I will try to set the crossover a little higher and see what happens.
 

astolfo

Member
Thread Starter
Joined
May 1, 2021
Messages
31
More  
Preamp, Processor or Receiver
Cayen
I am sorry, but would you mind telling me how to find the step function so I can find reflection spots? I forgot..:hide:
 

astolfo

Member
Thread Starter
Joined
May 1, 2021
Messages
31
More  
Preamp, Processor or Receiver
Cayen
It actually did more than I thought. It brought a lot of clarity and definition, and considerable improvement in the presentation/3D.
Extremely pleased by them. Left-No_podiums.jpg Left-podiums.jpg LPspectogram.jpg LSpectogram_LI.jpg
 

JosepFourier

Registered
Joined
Feb 19, 2018
Messages
5
I have developped a theory to calculate specific sets of points such that measuring the response of the room at each point and averaging all the measurements I obtain an excellent approximation to the response of the room as a whole. I use this averaged measurement to generate the filters in REW and the result is (I think) excellent. If you (or any other member of the forum) are interested I can provide you with a theoretical approach and practical advice.
 
Last edited:

FargateOne

Member
Joined
Jun 5, 2017
Messages
223
More  
Preamp, Processor or Receiver
Rotel RSX-1562
Additional Amp
Bryston 3B3 for fronts mains
Universal / Blu-ray / CD Player
Cambridge CXU
Front Speakers
B&W 804 D2
Center Channel Speaker
B&W HTM4D2
Surround Speakers
B&W 705
Subwoofers
SVS PC-2000 and SVS PC-2000 Pro
Other Speakers or Equipment
10 PEQ filters/channel in receiver with REW
Video Display Device
Samsung UN55ES8000
Other Equipment
miniDSP 2x4 HD
I have developped a theory to calculate specific sets of points such that measuring the response of the room at each point and averaging all the measurements I obtain an excellent approximation to the response of the room as a whole. I use this averaged measurement to generate the filters in REW and the result is (I think) excellent. If you (or any other member of the forum) are interested I can provide you with a theoretical approach and practical advice.
care to elaborate a little?
 
Top Bottom