serko70

Builds updated today with these changes: Added: Hypex Input EQ equaliser entry Added: "Iron" colour scheme for spectrograms and...

Dear John, In the latest version (ea28), copying AllSPL selections to Overlays doesn't update Overlays window immediately. Overlays is...

Builds updated today with these changes: Added: Show a warning if the measurement and loopback input or output selections are the same...

Dear John, No effect on calculations but just a visual bug I guess, the FDW extension does not show up for some measurements in the...

A few stands of potted bamboo or live/dried potted plants along the side walls works well... Wooden planters filled with sand and/or...

Marketing - reason to buy a new equipment Measurement devices 32 bits are the very standard in IT/digital computing, unlike 24bits (3...

As far as I know max human hearing capacity is something like 120dB. Why on Earth do we ever need and have 32 bit equipment then?

Thanks. I left the microphone intact for all measurements - so unsure on the behaviour and which equipment may be causing the mismatch...

Builds updated today with these changes: Changed: Merging loopback cal to the IR ignores the state of the Analysis "Limit cal data...

DAC5L1 and DAC5 R2 seem to be the only consistent measurements timing-wise and they reveal a HF mismatch possibly due to left speaker...

Did you move the microphone during these measurements? Some of them are 2 to 4 meters off?

Builds updated today with these changes: Added: An indicator ("T") at the bottom of the impulse graph shows the position of the timing...

Yes. It is labor-intensive, and it involves repeatedly switching back and forth between the EQ window, the overlays window (to visually...

Are you applying linear and/or min phase filters as necessary to shift the "response" to the step to remove left and right speaker...

Just to experiment, I sometimes fully invert excess phase without even any smoothing from 100Hz to 1000Hz (this is the range we're truly...